SXT SA5

RBSXTG-5HPnD-SAr2

SXT SA5
SXT SA5SXT SA5SXT SA5SXT SA5SXT SA5

مزایا

SXTG-5HPnD-SAr2 is a low cost, high speed 5GHz outdoor wireless sector access point. It has a 90 degree antenna to provide a wider coverage than our previous SXT units.

Complete with a ready to mount enclosure and built-in 14dBi antenna, the package contains everything you need to set it up in a matter of minutes. The inside of the case is covered in special shielding to improve operation in high interference areas and antenna front to back ratio.

Box contains: SXT wireless device with integrated antenna, pole mounting bracket, mounting ring, PoE injector, power adapter, quick setup guide

Product specifications

Details
Product code RBSXTG-5HPnD-SAr2
CPU nominal frequency 600 MHz
CPU core count 1
Size of RAM 64 MB
10/100/1000 Ethernet ports 1
Wireless standards 802.11a/n
Wireless chip model AR9344
Number of USB ports 1
Supported input voltage 6 V – 30 V
PoE in Yes
Voltage Monitor Yes
PCB temperature monitor Yes
Dimensions 140x140x56mm
Operating System RouterOS
Tested ambient temperature -30C .. +80C
License level 4
Antenna gain DBI 14
CPU AR9344
Max Power consumption Up to 7W
USB Power Reset Yes
USB slot type USB type A
Number of chains 2
Storage type NAND
Storage size 128 MB

Wireless specifications

5 GHz
  Transmit power (dBm) Receive Sensitivity Transmit power (mW)
6MBit/s 30 -96 1000
54MBit/s 27 -80 501
MCS0 30 -95 1000
MCS7 26 -73 398

wireless parameters may be limited in software, depending on your local regulatory limitations

Gigabit PoE injector

24V 0.8A power adapter

Metal ring (one)

Ethernet test results

RBSXTG-5HPnD-SAr2 AR9344 1G 1 port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 81.0 983.7 232.0 950.3 269.6 138.0
Bridging 25 bridge filter rules 81.0 983.7 86.0 352.3 87.6 44.9
Routing none (fast path) 81.0 983.7 210.0 860.2 226.9 116.2
Routing 25 simple queues 81.0 983.7 103.9 425.6 106.6 54.6
Routing 25 ip filter rules 56.8 689.8 59.6 244.1 60.5 31.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
۹۱۰۰۴۱۰۰ ۰۲۱ ۹۱۰۰۴۱۰۰ ۰۲۱