SXT 5

RBSXT5HPnDr2

SXT5
SXT 5

مزایا

SXT 5 is a low cost, high transmit power 5GHz outdoor wireless device. Up to 1250mW transmit power! SXT 5 can be used for point to point links or as a CPE for point to multipoint installations.

Complete with a ready to mount enclosure and built-in 16dBi antenna, the package contains everything you need to make a point to point link, or connect to an AP.

Box contains: one SXT 5, PoE injector, 24V power adapter, mounting bracket, metallic mounting loop.

Product specifications

Details
Product code RBSXT5HPnDr2
CPU nominal frequency 600 MHz
CPU core count 1
Architecture MIPS-BE
Size of RAM 64 MB
10/100 Ethernet ports 1
Wireless standards 802.11a/n
Wireless chip model AR9344
Number of USB ports 1
PoE in Yes
Supported input voltage 5 V – 30 V
Voltage Monitor Yes
PCB temperature monitor Yes
Dimensions 140x140x56mm, 265g
Operating System RouterOS
Tested ambient temperature -30 .. +70C
License level 3
Antenna gain DBI 16
CPU AR9344
Max Power consumption 11W
USB Power Reset Yes
USB slot type USB type A
Number of chains 2
Storage type NAND
Storage size 64 MB

Wireless specifications

5 GHz
  Transmit power (dBm) Receive Sensitivity Transmit power (mW)
6MBit/s 30 -96 1000
54MBit/s 27 -81 501
MCS0 30 -96 1000
MCS7 26 -77 398

wireless parameters may be limited in software, depending on your local regulatory limitations

24V 0.8A power adapter

Metal ring (one)

PoE injector

Ethernet test results

RBSXT5HPnDr2 AR9344 100M 1 port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 8.1 98.4 23.5 96.3 148.0 75.8
Bridging 25 bridge filter rules 8.1 98.4 23.5 96.3 87.6 44.9
Routing none (fast path) 8.1 98.4 23.5 96.3 148.0 75.8
Routing 25 simple queues 8.1 98.4 23.5 96.3 106.6 54.6
Routing 25 ip filter rules 8.1 98.4 23.5 96.3 60.5 31.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results