مزایا

سوئیچ CRS125-24G-1S-RM میکروتیک دارای ۲۴ پورت Gigabit Ethernet و یک درگاه SFP برای اتصال فیبر بوده و قابلیت نصب در رک را دارد. سیستم عامل سوئیچ CRS125-24G-1S-RM میکروتیک RouterOS با قابلیت‌های مناسبی در زمینه Switch بوده و در شبکه‌های یکپارچه میکروتیک می‌توان از قابلیت‌های مناسب آن بهره‌مند شد.

Product specifications

Details
Product code	CRS125-24G-1S-RM
CPU nominal frequency	600 MHz
SFP DDMI	Yes
CPU core count	1
Architecture	MIPS-BE
Size of RAM	128 MB
10/100 Ethernet ports	0
10/100/1000 Ethernet ports	24
MiniPCI slots	0
MiniPCI-e slots	0
Number of USB ports	1
Power Jack	1
Supported input voltage	8 V – 28 V
PoE out	No
PoE in	Yes
Voltage Monitor	Yes
CPU temperature monitor	No
PCB temperature monitor	Yes
Dimensions	443x142x44mm
Operating System	RouterOS
Operating temperature range	-35C to +65C tested
License level	5
Antenna gain DBI	No
Current Monitor	No
CPU	AR9344-DC3A-R
Max Power consumption	15W
SFP ports	1
SFP+ ports	0
USB slot type	microUSB type AB
Number of chains	0
Serial port	RJ45

Included parts

Switching results

CRS125-24G-1S-RM
Mode	Configuration	64 byte		512 byte		1518 byte
		kpps	Mbps	kpps	Mbps	kpps	Mbps
Switching	Non blocking Layer 2 throughput	37,202.4	19,047.6	5,874.1	24,060.2	2,031.9	24,674.9
Switching	Non blocking Layer 2 capacity	37,202.4	38,095.2	5,874.1	48,120.3	2,031.9	49,349.8
Switching	Non blocking Layer 1 throughput	37,202.4	25,000.0	5,874.1	25,000.0	2,031.9	25,000.0
Switching	Non blocking Layer 1 capacity	37,202.4	50,000.0	5,874.1	50,000.0	2,031.9	50,000.0

Performance test results

CRS125-24G-1S-RM		AR9344 1G all port test
Mode	Configuration	1518 byte		512 byte		64 byte
		kpps	Mbps	kpps	Mbps	kpps	Mbps
Bridging	none (fast path)	81.0	983.7	232.0	950.3	269.6	138.0
Bridging	25 bridge filter rules	81.0	983.7	86.0	352.3	87.6	44.9
Routing	none (fast path)	81.0	983.7	210.0	860.2	226.9	116.2
Routing	25 simple queues	81.0	983.7	103.9	425.6	106.6	54.6
Routing	25 ip filter rules	56.8	689.8	59.6	244.1	60.5	31.0

 

 

 

 

 

 

 

 

 

 

 

 

1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results